top of page

Care Instructions

Caring For Your Refinished Surfaces

Caring for your refinished bathtub and shower surfaces

Due to the non-porous surface of the finish, there is no need to use abrasive cleansers on refinished bathtubs, showers, sinks & countertops. Many household liquid detergents will give excellent results. To remove mineral stains, use a mild acid solution such as a liquid bowl cleaner.

All organic coatings must cure. They start to cure at the time of application and must cure for a total of approximately 30 days.​

Top Ten List of Rules For Your Refinished Surfaces:

  1. DO NOT use the surface for the specified number of days or hours indicated by the refinisher who completed the job. Typically, we recommend waiting 48 hours before using your tub, shower, sink or refinished countertops

  2. DO NOT leave soap, bottles or other objects on the finish.

  3. DO NOT let a leaky faucet go unrepaired.

  4. DO NOT use abrasive cleansers. No S.O.S® Pads No Comet® or Ajax® No Soft Scrub®

  5. DO NOT use loose bath mats with suctions underneath.

  6. DO NOT pick surface dust off with your finger. Any surface dust will dissipate in 3-4 weeks with normal cleaning and usage.

  7. The best way to keep your new surface clean is to wipe it down with a towel after each use. You don't have to wipe it dry.

  8. Maintain caulking around the tub.

  9. Here are some good cleansers to use: Lysol Basin and Tile Cleaner Mr. Clean Fantastik Scrubbing Bubbles

  10. Wax tubs once every 4 months with a spray-on wax. You should wax your bathtub within 30 days after it has been refinished.



Need More Info?

Send us a message & we'll be in touch. 

bottom of page